Lathe of this inclined slideway numerical control installs use manual
- Time:
- Click:64
- source:SCHOCH CNC Machining
Below small make up sum up lathe of inclined slideway numerical control to install to everybody with use method: The Normal Align=justify>normal Align=justify>1, job precision to assure a machine tool, bolt of foot of soil preparation of the attune when installation or damping pay a foot, assure machine tool standard, do not make slideway screwy.
Normal Align=justify>normal Align=justify>2, installation debugs the job to finish, must check rotational place to whether reach electric equipment line neatly first reliable, have running test next, experiment time is little at 2 hours, decide normal and rear accessibility test-drive is machined.
Bearing of Normal Align=justify>normal Align=justify>3, main shaft uses the meeting after period of time to produce gap in the machine tool, the user can be adjusted appropriately according to using rate.
Space is too little, easy bring about bearing calorific; gap is too big, the precision that can affect work very exterior surface roughness.
The locknut degree of tightness that can pass bearing of pair of main shaft around undertakes adjustment, the clearance of bearing maintains in 0.
006mm is beautiful.
The size of lathe of this Normal Align=justify>normal Align=justify>4, inclined slideway numerical control procrastinates board all deserve to have iron of a place of strategic importance, can be adjusted after use period of time through adjusting iron of a place of strategic importance big, small procrastinate board clearance, should in order to move agile, it is advisable to do not affect treatment precision.
Lathe of this Normal Align=justify>normal Align=justify>5, inclined slideway numerical control slides place must lubricate adequately, every (with 8 small chronometer) should undertake adding noting mechanical oily 2-4 second, bearing is lubricant should every 300- - 600 hours change.
It is Normal Align=justify>normal Align=justify>6, good to should be done at ordinary times lathe of this inclined slideway numerical control maintains reach clean job.
Lathe of this Normal Align=justify>normal Align=justify>7, inclined slideway numerical control should read machine tool operation instruction handbook in detail before use.